DVB-T2 Configuration and Settings
R&S
®
SMCVB-K164
22
User Manual 1179.0974.02 ─ 02
The value is measured or computed depending on the setting of "T2-MI Interface":
●
If "T2-MI Interface > Off" and "Source > External/TS Player", the value is mea-
sured.
●
If "T2-MI Interface > On", the value is computed.
Remote command:
[:SOURce<hw>]:BB:T2DVb:PLP<ch>:USEFul[:RATE]?
4.2.3
T2-MI Data Packet Timing Settings
Access:
1. Select "Input Signal > T2-MI Interface > On".
The "T2-MI Data Packet Timing" side-tab appears.
2. Select "Input Signal > T2-MI Data Packet Timing"
The tab provides packet timing settings for data input at the T2-MI interface.
All operations on frame_idx are modulo N
T2
.
Individual addressing functions (packet_type 21
16
) can be sent at any time.
The T2 timestamp refers to the transmission time of the super frame, although it is sent
at any time.
The figure below shows a single PLP. If using multiple PLPs, the interleaving frame
duration T
IF
and hence the timing requirements for the type 00
16
packets can be differ-
ent for different PLPs.
Input Signal Settings
