DVB-T2 Configuration and Settings
R&S
®
SMCVB-K164
68
User Manual 1179.0974.02 ─ 02
PCR, DTS/PTS
Activates the correction of time stamps in the replayed TS data stream. The correction
allows you to decode the stream without interruption when the play file is looping.
If you set "Nullpacket Stuffing = On" and "PCR, DTS/PTS = On", the time stamps in the
streams are corrected when nullpackets are inserted into the stream.
Remote command:
TDT/TOT
Activates the correction of the time and date table in the replayed TS data stream. The
correction allows you to decode the stream without interruption when the play file is
looping.
Remote command:
4.12
Local IP Data Network Settings
Access:
1. Select "Input Signal > General > Source > External".
2. Select "Input Signal > General > Input > IP"
3. Select "Input Signal > IP Channel x > Local IP Data Network".
The tab provides access to local IP data settings necessary to configure the board
address.
The remote commands necessary to configure local IP data network settings are
described in
Chapter 6.10, "BCIP Subsystem"
Chapter 5.1.1, "How to Apply an External IP Input Signal"
Local IP Data Network Settings