Instrument Assembly for Board and Module Exchange
R&S SM300
Version 04
48
Service Manual SM300: 1147.1652.00
Instrument Part No SM300: 1147.1498.03
Installing the power
supply
1.
Before installing power supply, check silicone profile in front area.
2.
Insert power supply into carrier unit from rear and plug it into
backplane. Do not apply strong pressure on backplane when doing so
(risk of damage to conductor tracks on PCB).
3.
Fasten 6 special screws at bottom (similar to DIN 7985 M3×5).
4.
Install control PC module (see section 1.3.3.12).
5.
Install duoblind (see section 1.3.3.8).
6.
Install carrier lid (see section 1.3.3.5).
7.
Install both cases and rear frame (see section 1.3.3.3).
8.
Install handle (see section 1.3.3.2).
9.
Install both protectors (see section 1.3.3.1).
Figure 1-32
Figure 1-33
Figure 1-34
Figure 1-35
