manualshive.com logo in svg

R&S M3SR 4100 Series, Руководство по эксплуатации, Страница: 512 / 706

Поделиться
Скачать
R&S M3SR 4100 Series Скачать руководство пользователя страница 512

M3SR Series 4100

Starting ATU Learning for SECOM-H Hopset

4.176

Operating Manual 6175.4760.02 – 01

4.8.3.11

Starting ATU Learning for SECOM-H Hopset

By means of softkey 'ATU Learn' the operator can start ATU learning for a SECOM-H hopset. 
This function is only available with a connected antenna tuning unit.

Softkey

Type

Description

Activate

Start the ATU tuning process in the  selected 
frequency range.

 

Starting ATU Learning

1.

Press 'ATU Learn' softkey to start the 
learning process.

The ATU starts learning on the currently se-
lected SECOM-H hopset.

The tuning process can be aborted any 
time by pressing the 'ESC/CLR' button.

During learning the following status is dis-
played:

If learning was successful, the following status 
is displayed:

By using the 'ATU learn' function ATU settings 
are stored in a selectable memory bank. In the 
learning procedure all SECOM-H channels of 
the hopset are set. In each case the antenna 
tuning unit will start tuning anew.

If learning is aborted, the following status is 
displayed:

Содержание M3SR 4100 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов