61/118
This document and the information contained herein, is the exclusive property of R&M Materials Handling Inc. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials
Handling Inc. Copyright 2020 © R&M Materials Handling Inc. All rights reserved.
7.3.2
Operational Checks with the Emergency Stop Button Pushed Down
1
Turn on the main power isolation switch.
After the main isolation switch has been turned on, the product becomes operational
(energized).
WARNING
If the emergency stop button is faulty, the product might move unexpectedly
during the following checks. Unexpected movements during checks could
result in death or serious injury.
2
Emergency stop button
With the emergency stop button pressed down, check that the product does not move
when the direction control pushbuttons are pressed. This verifies that the emergency
stop button is working properly.
3
Control devices without power
Check for smooth mechanical operation of each pushbutton, joystick or safety switch
on the
controller
.
7.3.3
Controller Set Up
WARNING
Never release the emergency stop button and drive the product until you are
sure that it is safe to do so. Releasing the emergency stop button and driving
the product when it is unsafe to do so could cause death or serious injury.
1
Make sure that the main power isolation switch is ON.
The product only becomes operational (energized) after the necessary steps have
been followed to established communication between the product and controller.
2
If applicable, use the key switch to turn on the
controller
.
3
To prepare the
controller
for operation, release the emergency stop button by turning
it clockwise (or, if it is a push-pull button, by lifting it up) so that it is in the raised
position.
