Ralco R 221 ACS DHHS Series, Инструкция по эксплуатации

Страница: 14 / 245

MTR 221 ACS - MTR 221 ACS DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
I
NTRODUCTION
6
Model R 221 ACS - R 221 ACS DHHS
MT
R
2
21
ACS
-
MTR
2
21
AC
S DHH
S - In
trod
uction
Type B Applied Part No. 02-02 Ref. 601-I-IEC (Not applicable for R 915, R 915 S and R 915 S DHHS)
Follow Instructions for Use Ref. ISO 7010-M002 (see the collimator label)
General Warning Sign No. 03-02 Ref. IEC 601-1
Caution: Laser Radiation Ref. 60825-1
This symbol identifies electrostatic sensitive devices.
•
Always transport electrostatic sensitive devices (such as PCB) in their static shielding bags or
boxes.
• Always use the ESD protection service kit when handling electrostatic sensitive devices.
• Attach the wristband to your wrist (1) and connect the ground cable of the wristband
to the conductive work surface (2) .
• Connect the second ground cable (3) to the conductive work surface (2).
• Attach the crocodile clip to a
reliable ground of the cabinet
or console, where the PCB
has to be installed.
• Place the PCB on the conductive work
surface before installing them.
• Place the PCB on the conductive work
surface for hardware settings or
replacement of components.
• Never remove or disconnect the
wristband before all electrostatic
sensitive devices are installed.
• Never remove or disconnect the
wristband before all removed
electrostatic sensitive devices are
safely packed in their static shielding
bags or boxes.
Safety Signs on the Product
• Do not remove or change safety signs!
• Replace illegible safety signs by genuine spare parts!
• Clean soiled safety signs!
Refer to the labelling drawings of the components to see the positions of the labels.
Safety of Personal Protective Equipment
• The collimator does not contain polluting materials or products with the exception of the lead that composes the
shutters and an inner lining of the collimator cover, if properly disposed of at the end of its life cycle.
• Avoid direct contact with lead especially for prolonged periods.
• Gloves must be worn when handling the disassembled collimator, especially the parts mentioned above.
• Do not use for any other work.
• Disposable gloves may also be worn and can be disposed with normal trash.
Disposal
• Dispose any material, batteries and X-ray equipment in accordance with the requirements of national legislation!
• Do not dispose X-ray equipment together with domestic waste!
Fig. 1 ESD protection kit