Ralco R 221 ACS DHHS Series, Инструкция по эксплуатации

Страница: 118 / 245

MTR 221 ACS - MTR 221 ACS DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
T
ROUBLESHOOTING
110
Model R 221 ACS - R 221 ACS DHHS
MT
R
2
21
ACS
-
MTR
2
21
AC
S DHH
S - T
roubl
eshoo
ting
I
NDICATORS
GC-LED-4A
LED4 LED CONFIG
Configuration
message
received
Green Very slow
blink speed
(0.05 sec)
• Incorrect or not existing
data
• Used by Ralco
Medium blink
speed (0.3
sec)
• Temporary correct data • Used by Ralco
Slow blink
speed
(1 sec)
• OK, data correct and
Flash Memory stored
• Used by Ralco
LED5 HOME
photocell status
per each
connected
motor
Green ON • Photocell J10 (Cross
shutters) engaged
• Not applicable
OFF • Photocell J10 (Cross
shutters) free
• Not applicable
LED6 HOME
photocell status
per each
connected
motor
Green ON • Photocell J11 (Long shut-
ters) engaged
• Not applicable
OFF • Photocell J11 (Long shut-
ters) free
• Not applicable
LED7 HOME
photocell status
per each
connected
motor
Green ON • Photocell J12 (Filter)
engaged
• Not applicable
OFF
• Photocell J12 (Filter) free • Not applicable
LED8 HOME
photocell status
per each
connected
motor
Green ON • Photocell J13 not used • Not applicable
OFF
• Photocell J13 not used • Not applicable
Number Color Description Fault finding and solutions
LED1 Green +12 V DC or +24 V DC In case LED1 is OFF:
• check if +12/+24 V is present; LED1 should be ON
• if still NOK, check if system cables are connected correctly to
GC-LED-4A
• if still NOK, replace GC-LED-4A (see chapter S
UBSTITUTIONS
)
• if still NOK, replace collimator.
LED2 Yellow Software version • check if LED2 blinks 4 times
• if NOT, wrong software version, replace collimator (see chap-
ter
S
UBSTITUTIONS
)
Number LED Color Function Fault Indication Action