www.raisecom.com
User Manual
62
A.5.4 Four User Cross Query (EEPROM)
In Cross Set Query menu, press number key
4
and there will be the following information:
Input Group No.(1-4, Ese=Cancel):
Enter group number 1, cross connection of the first user E1 information (the 1
st
STBUS) saved in
EEPROM will be displayed:
First User Group Cross Set (EEPROM)
Timeslot 1 2 3 4 5 6 7 8
cross 0 0 0 | 1 2 | 1 3 | 1 4 | 1 5 | 1 6 | 1 7 | 1 8
8 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0
16 1 17 | 1 18 | 1 19 | 1 20 | 1 21 | 1 22 | 1 23 | 1 24
24 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0
CROSS Query Command:1-4, Menu Display: M, Return: Q Command:
Note
: in this table the address indicates the output data direction and the contents indicate the input
data direction. Data in each cell consists of two parts, the first part indicates user E1:
1: user E1 1 2: user E1 2 3: user E1 3 4: user E1 4
RC3000 does not support the cross connect from user group to user group, so the input data direction
of cross group 5-7 is meaningless. And the second part indicates the channel of cross group: 1-31. 0
0 indicates there is no cross connection.
Address indication: result of row number plus column number is the channel number. RC3000 has
sub-card auto-sensing and automatic channel configuration functions, and the information saved in
EEPROM may be different from that of RAM (real information), so you can use this command to get
the information saved in EEPROM.
A.6 State Info Query
In main menu press number key 3 there will enter state information query menu:
1.Receive State Query
2.Transmit State Query
State Query Command:1-2, Menu Display: M, Return: Q Command
:
A.6.1 Receive State Query
In state information query menu press number key 1 there will be the following information:
Input Group No.(1-4, Esc=Cancel):
Enter group number 1, there will receive signal status information:
First Group Receive State
Channel 1 2 3 4 5 6 7 8
state 0 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
8 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16
