8
load and press
RETURN
. After a short delay the file will be loaded into the
module. If the filing system can’t find a file or encounters some other
problem, a pop-up message will occur.
To SAVE a file select the FILES pop-up
f1
move the highlight to SAVE and
press
RETURN
. A small save pop-up will occur and wait for you to type in
a file name. The ← key can be used to change the file type. Make sure that
you use the correct file type. If you try to save a musical composition as a
sound (s.) file, then the current sound set will be saved, and not the music.
When you have entered a file name next to its correct file type prefix, press
RETURN
and the file will be saved to the current disk. You cannot save files
to the TMS system disk. It is write protected. You will need a new disk to
save new or edited files.
To RENAME a file select the FILES pop-up and move the highlight to
RENAME (as above) and press
RETURN
. A catalogue will be displayed.
Move the highlight to the file you want to rename, press
RETURN
and type
in the new name. Press
RETURN
and the file will be renamed. You may
use the CATALOGUE option to check the renamed file.
You may DELETE a file in the similar way. A catalogue will allow you to
select the file you wish to delete.
Load sound 2
m.sonata
m.rockroll
m.jazz
s.woodwind
music
s.effects
Rename
m.rockroll
m.jazz
s.woodwind
m.reggae
s.effects
m.sonata
Rename
m.s
o
nata
Save music
m.
SOUND 1
SOUND 2
↕
←
←
CHANGE FILE TYPE
midi
sound
linker
notepad