29
Filter number
gives the overall or global filter for the tune from the set of 4
filters defined in the sound set. The filter may be set off or on for each voice.
Voice
gives the current voice number displayed by the VMW. Press
RE-
TURN
to display the secondary pop up and change the
Octave
,
Filter
and
Section
Values for that voice. Press
RETURN
to pop this window down
again. You can change
Voice
and pop up the secondary window again. All
Values for each voice are displayed together in Info.
With
Octave
set to 3 the pitch of the notes on the VMW is then correct as
written. Selecting another octave will transpose the voice up or down.
Filter
can be either off or on for each voice. If set on the voice is passed through
the filter number selected. Section selects a particular loop section within a
voice (if more than one) or turns the whole voice into a loop section (see
Loop Sections).
If
Autosound
is on, blue notes entered at the end of a voice are sounded
when you press
RETURN
.
Autosound
can be turned off to make entering
music a quieter and quicker task.
If
Autobar
is on, barlines are entered automatically at the end of a voice
according to the current time signature. The EDITOR will not put in a barline
unless the bar is the correct duration. If
Autotie
is also on then it might resort
to tieing two notes across the barline. Otherwise it will ask you whether you
want to tie over the barline or not. Press
Y
to tie,
N
to stay where you are
and alter the duration of the current note so that it will fit. You will be warned
if the barline cannot be inserted correctly. You must then either change the
duration of the note(s) in that bar so that they will fit or enter a barline
yourself (key
4
).
Info
Files
Values
Commands
Octave
Save
Filter
Section
Volume
Voice
Filter number
Autosound
F # 6 sharps
Save
4/4
Presto
15
3
1
on
Autobar
on
2
off
off