21
assumed that you are first time through. However, if you have entered from
another voice perhaps without a repeat section then you could quite likely
be second time through. This feature allows for flipping between voices and
ending back at the same point irrespective of repeats in any or all of the
voices. When scrolling past an end of repeat symbol (1st time through) the
barmeter cursor will jump forwards indicating that the second time through
that section has been missed out.
Pressing
SHIFT
together with
↑
will increase the pitch of a note by 1 octave
assuming that the new note is still within range and there are no accidentals
in effect in that bar. Press
SHIFT-=
to go the other way. This command is
particularly useful when used as a macro command for transposing sec-
tions of a voice by an octave (see Commands:
Set macro
).
Inserting notes
Notes can always be added to the end of each voice if there is sufficient free
space. Look at Info to see what is available and how much has been used
in each voice. Notes can be inserted into a voice by pressing
+
. An extra
note is generated at the cursor position and the notes are pushed one
space to the right. The extra note will be identical to the original one. You
can change the pitch, duration, etc. in the normal way. Note that the bar you
are in might not now contain the correct number of beats.
+
is inactive at the
2nd and 3rd parts of a triplet. At the 1st triplet note,
+
inserts a single note
of the same duration as the whole triplet. Whole sections may be inserted
in a voice using the notepad facilities (see Files - notepad).
↑
=
SHIFT
SHIFT
Insert note
+
