
13
number on the left indicates the current voice being displayed on the VMW.
If you flip between voices then the barmeter cursor will not move unless the
new voice is shorter. You can move the barmeter cursor quickly through a
tune using
SHIFT-[
and
SHIFT-]
. When you release the keys the note
cursor will point to the new section of music in that voice.
The small playback indicators on the righthand end of the barmeter are
highlighted when voices are selected for playback. They remain highlighted
until switched off.
SHIFT-1
is used to switch voice 1 on or off,
SHIFT-2
to
switch voice 2 etc. Any combination of voices may be played back (includ-
ing none!) irrespective of the current voice displayed on the VMW.
The playback indictors also show whether a voice is being played as a
whole voice or as a loop section. An
S
indicates a loop section. Loop
sections are intended to be used for repeated rhythm tracks, bass lines and
accompaniments and are set from Values.
Bar number
The bar number device indicates the number of the current bar displayed
by the VMW. Unlike the barmeter, repeats are ignored. When flipping
between voices the bar number might not necessarily remain the same
since it only counts the barlines and not the duration of the notes.
1
2
3
1
S
2
3
Barmeter cursor
Current voice on VMW
1 2 3
Active playback voices
SHIFT
[
]
SHIFT
SHIFT
16