Rae UltraRAE 3000, Руководство пользователя

Страница: 34 / 129

UltraRAE 3000 User’s Guide
To begin measuring, turn on the UltraRAE 3000. This screen is
shown, which includes the CF (correction factor) and measurement
gas type for calibration reference:
Press [N/-] to advance. You will see this screen:
Do not begin sampling yet!
Before you start sampling, you must insert a RAE-Sep separation tube
into the inlet/holder. Follow the Separation Tube Preparation and Placing
A Tube Into The UltraRAE 3000 instructions before pressing any
buttons on the UltraRAE 3000. Once the tube is in place, then proceed to
measuring.
IMPORTANT!
Once a tube’s ends are broken off, the material inside is exposed.
Therefore, use the tube for sampling as soon as possible.
10.4 Separation Tube Preparation
CAUTION!
Wear hand and eye protection when breaking tube tips. Use caution
in handling tubes with broken ends. Keep away from children. RAE-
Sep tubes should be disposed of according to local regulations. See
footnotes of data sheets for disposal information.
32