Rae UltraRAE 3000, Руководство пользователя

Страница: 87 / 129

UltraRAE 3000 User’s Guide
22.7.13 Power On Zero
When Power On Zero is on, the instrument is ready to perform a zero
calibration when it is turned on.
1.
Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates your selection).
3. When you have completed your selection, press [MODE].
•
Press [Y/+] to save the change.
•
Press [N/-] to discard the change and move to the next sub-
menu.
22.7.14 Unit ID
This three-digit number keeps data separated by instrument when
more than one instrument is used in a network. If multiple sensing
units are attempting to communicate with the same Host, then the
units must all have a different Unit ID.
1.
Press [Y/+] to step through all 10 numerals (0 to 9). If you pass
the numeral you want, keep pressing [Y/+]. After it counts up to
9, it starts counting up from 0 again.
2. Press [N/-] to advance to the next digit. The next digit to the right
flashes.
Repeat this process until all three digits of the Unit ID are entered.
3.
Press [MODE] when you are done.
•
Press [Y/+] to save the change.
•
Press [N/-] to discard the change and move to the next sub-
menu.
Note: If you are using an UltraRAE 3000 with a RAELink3, this unit
ID is displayed by the RAELink3.
85