Rae UltraRAE 3000, Руководство пользователя

Страница: 73 / 129

UltraRAE 3000 User’s Guide
22.5.4 TWA Alarm
You can change the TWA (time-weighted average) Alarm limit value.
The value is typically set by the instrument to match the value for the
calibration gas. It is expressed in parts per billion (ppb).
Note:
The
default value depends on the measurement gas.
To change the TWA Alarm value:
1.
Press [Y/+] to increase each digit’s value.
2. Press [N/-] to advance to the next digit.
3. Again, use [Y/+] to increase the number.
Repeat this process until all numbers are entered.
When you have completed your selections, press [MODE]. You will
see two choices:
•
Save
•
Undo
You have the opportunity to register the new settings or to change
your mind and revert to your previous settings.
•
Press [Y/+] to save the changes.
•
Press [N/-] to undo the changes and revert to the previous
settings.
71