ToxiRAE Pro User’s Guide
57
18.5. Replacing The Sensor
Follow the instructions for removing the cap in the previous section.
1.
Gently lift out the sensor module with your fingers:
2.
The sensor can only go into its slot one way. The connector inside the ToxiRAE
Pro and the indexing guides are good visual indicators of how to set the sensor
into position.
3.
Place the sensor module into the ToxiRAE Pro. Make sure the indexing keys are
aligned (the sensor can only go in one way) and that it is seated firmly.
4.
Carefully place the cap back onto the ToxiRAE Pro by screwing it on.
Note:
Always calibrate the ToxiRAE Pro after replacing the sensor module.
Sensor module
Match index keys
on sensor module
with ToxiRAE Pro
enclosure
Sensor
indexing
key
