ToxiRAE Pro User’s Guide
28
You are taken to the next submenu, Interval.
Interval
Intervals are shown in seconds. The default value is 60 seconds. The maximum interval is
3600 seconds, and the minimum is 1 second.
1.
Press [Y/+] repeatedly to select a desired number. Numbers increase from 0 to 9.
Once 9 is reached, pressing [Y/+] again “wraps” around back to 0.
2.
Press [MODE] to advance to the next digit.
3.
Repeat this process until the desired value is entered.
When you have completed your selections, press [MODE] repeatedly until “OK” is
highlighted.
•
To save the new value, press [Y/+].
•
To cancel the changes and keep the settings as they were, press [MODE] to
highlight “Cancel.” Then press [Y/+].
You are taken to the next submenu, Data Selection.
Data Selection
Data Selection allows you to select which types of data are stored and made available
when you download your datalog to a computer via ProRAE Studio II software.
You can choose any or all of four types of data (you must choose at least one):
•
Minimum
•
Average
•
Maximum
•
Real Time
1.
Press [MODE] to step from one option to the next. The highlighter indicates your
choice.
2.
Press [Y/+] to toggle your selection on or off (the check box indicates “on” with
an “X”).
3.
When you have completed your selections, press [MODE] repeatedly until “Exit”
is highlighted.
4.
Press [Y/+] to save the changes and exit.
