ToxiRAE Pro User’s Guide
24
Low Alarm
Set the Low Alarm as follows:
1.
In the Low Alarm submenu, press [Y/+] repeatedly to select a desired number.
Numbers increase from 0 to 9. Once 9 is reached, pressing [Y/+] again “wraps”
around back to 0.
2.
Press [MODE] to move to the next digit.
3.
When you are satisfied with the number, press [MODE] until “OK” is highlighted.
4.
To save the new value, press [Y/+]. The value is saved, and the menu advances to
STEL Alarm.
To exit without saving the new value:
1.
Press [MODE] to advance to Cancel.
2.
Press [Y/+] to exit the Low Alarm submenu and advance to STEL Alarm
submenu.
STEL Alarm
Set the STEL Alarm as follows (except if the ToxiRAE Pro has an O
2
sensor; then there
is no STEL Alarm):
1.
In the STEL Alarm submenu, press [Y/+] repeatedly to select a desired number.
Numbers increase from 0 to 9. Once 9 is reached, pressing [Y/+] again “wraps”
around back to 0.
2.
Press [MODE] to move to the next digit.
3.
When you are satisfied with the number, press [MODE] several times until “OK”
is highlighted.
4.
To save the new value, press [Y/+]. The value is saved, and the menu advances to
TWA Alarm.
To exit without saving the new value:
1.
Press [MODE] to advance to Cancel.
2.
Press [Y/+] to exit the STEL Alarm submenu and advance to the TWA Alarm
submenu.
TWA
Set the TWA Alarm as follows (except if the ToxiRAE Pro has an O
2
sensor; then there
is no TWA Alarm):
1.
In the TWA Alarm submenu, press [Y/+] repeatedly to select a desired number.
Numbers increase from 0 to 9. Once 9 is reached, pressing [Y/+] again “wraps”
around back to 0.
2.
Press [MODE] to move to the next digit.
3.
When you are satisfied with the number, press [MODE] until “OK” is
highlighted.
