RADWIN 5000 SCB Jet User Manual
Release 4.2
5-16
Preferences: Monitor
RADWIN Manager Setup
File
:
Place a checkmark here to save traffic and identification information to the
Monitor
file
. The content of the Monitor file is described in detail in
PtP: Monitoring and
Diagnostics
.
Click the explorer button
to select the location of this file.
Click the select headers button
to select the categories of data to be saved
in the Monitor file. Place a checkmark next to each category of data you wish
to be saved in the Monitor file. Click
OK
to accept your choices.
Interval:
Save the data every X seconds to the Monitor file (and the Utilization file if relevant).
X can be an integer value only, and from 1 to 60.
Utilization:
This option appears for PtMP only. The
Utilization file
stores SBM data. See
Figure 18-2
for more details.
Rx/Tx Rate Units:
Choose Mega bits per second (Mbps), or Frames per second (Fps)
Show IP
:Determine which IP address format to show on the main window for each unit: IPv4
or IPv6. The IPv6 option will work only if you have defined an IPv6 address for the
unit.
IPv6 Address Format:
If showing IPv6 addresses, choose Compressed or Expanded
Generate KMZ
: Relevant for Mobility sectors only.
•
Click
Apply
to apply your changes without closing the Preferences dialog box.
•
Click
OK
to apply your changes, and close the Preferences dialog box.
