RADWIN 5000 SCB Jet User Manual
Release 4.2
4-10
Step 3: Ground the HBS/HSU
Hardware Installation
12.Place this “unit” on the pole where you want to mount the ODU. Once it is in
place, rotate the pole clamp as shown, then tighten both bolts.
4.5.3 Step 3: Ground the HBS/HSU
There is a grounding lug on the rear of the HBS/HSU as shown in
Figure 4-19
. Connect it to
ground using 10 AWG wire.
Figure 4-19: HBS: Grounding lug
Figure 4-17: Rotate Clamp and tighten bolts
Figure 4-18: Mounting Kit on thin pole
•
When mounting an HBS/HSU on a pole or wall, make sure the unit is
oriented so that the cable connectors are at the bottom.
•
Do not mount an HBS/HSU horizontally
•
Make sure there are no direct obstructions in front of an HBS/HSU.
Grounding lug
