RADWIN 5000 SCB Jet User Manual
Release 4.2
4-7
Step 2: Mount the HBS/HSU
Hardware Installation
Figure 4-18
for mounting on a thin pole)
11.Place this “unit” on the pole where you want to mount the ODU. Once it is in
place, rotate the pole clamp as shown, then tighten both bolts.
Figure 4-11: Mounting an ODU on a horizontal pole
To attach the RADWIN 5000 SCB Jet unit to a vertical pole, use the radio vertical adaptor as
shown in
Figure 4-6
. When mounting a SCB Jet unit on a horizontal pole the vertical adaptor
is not needed:
Figure 4-7: Connect Pole Clamp to Radio
Holder
Figure 4-8: Tighten bolts
Figure 4-9: Rotate Clamp and tighten bolts
Figure 4-10: Mounting Kit on pole
