RADWIN 5000 SCB Jet User Manual
Release 4.2
5-3
Verify Connectivity to an HBS
RADWIN Manager Setup
For our configured demonstration system we use the configured IP address:
ping 10.104.50.200
leading to this:
Figure 5-1: Pinging the base station - IPv4
Under IPv6. the ping for the demonstration system will look like this:
ping 2005:104:50::200
Figure 5-2: Pinging the base station - IPv6
Any other response from ping means that the HBS is not responding. Check your
Ethernet connection and that both the PoE and HBS are switched on and then try
again. If you do not succeed, seek assistance from RADWIN Customer Service.
Pinging the HSUs should yield similar responses.
4. Dismiss the command line session (type
exit
from the command line session).
IPv6 is not available for an unconfigured unit.
