RADWAG MYA.3Y, Руководство пользователя

Страница: 6 / 132

- 6 -
1. BASIC INFORMATION
1.1. Intended use
Balances 3Y series are intended to precise mass measurement of weighed
loads conducted in laboratory conditions. It is designed only for non-automatic
weighing processes, thus the material to be weighed needs to be placed on the
center of balance’s weighing pan with required carefulness.
1.2. Precaution measures
Never use the balance 3Y series is areas endangered with explosion. Balance
3Y series is not designed to operate in EX zones. Do not make any changes in
balance structure.
1.3. Warranty
Warranty does not cover the following cases:
• Balance defects if it is utilized contrary to its intended use,
• Balance defects, if service claims removing or destroying product’s protective
stickers which protect the balance’s housing against unauthorized access.
• Mechanical defects or defects caused by liquids and natural wear,
• Balance defects caused by inappropriate setting of a defect of electric power
network,
• Defects caused by overloading balance’s mechanical measuring system.
1.4. Supervision over balance metrological parameters
Metrological parameters of a balance need to be checked by a user in
determined time intervals. Inspection frequency is conditioned by ambient
conditions in which a balance is used, type of carried out processes and adopted
quality management system.
1.5. Manual significance
It is very important to read the user manual carefully before switching on and
starting up balance operation, even if the user is experienced and has worked
with the this type of balance before.
1.6. Balance user training
A balance should be utilized and supervised only by users who are trained and
experienced in using this type of weighing instruments.