- 118 -
Cable: balance – printer (CITIZEN, EPSON)
Caution:
It is recommended to use peripheral equipment supplied by the manufacturer.
APPENDIX B – cooperation with KAFKA printer
An KAFKA printer is a device subordinate to a balance, thus any data is sent from
balance level. Correct cooperation between a balance and a printer requires setting
the same baud rate for both devices. Standard balance baud rate is set to 4800
bit/sec.
The baud rate setting in a KAFKA printer is carried out using micro switches.
Changing baud rate settings in a balance
PROCEDURE:
o
Press SETUP pictogram or press SETUP button
o
To open a screen on balance internal settings – press PERIPHERALS pictogram
o
Press PRINTERS field and set:
−
Printer type to NO
−
Printer port as RS 232
o
Check transmission parameters for the
RS 232 socket if used, and set:
−
Baud rate: 9600
−
Parity: no
−
Data bit: 8 bits
−
Stop bits: 1bit
−
Handshake: no
o
Return to weighing with procedure of saving changes.
Содержание MYA.3Y
Страница 2: ...2 APRIL 2013...