RADWAG MYA.3Y, Руководство пользователя

Страница: 10 / 132

- 10 -
After the elements setting, connect any additional devices and only then plug the balance
to power source. Power socket is located on back side of balance terminal containing the
display.
Balance for pipette calibration:
After balance start up change the standard weighing pan into the one for placing a glass
vessel (5) and on stabilization of mass indication press TARE button.
3.3. Balance cleaning
Clean the balance using a damp ch by gentle rubbing any contaminated places.
Remember to remove the weighing pan and its shields from the weighing chamber
before their cleaning.
CAUTION:
Cleaning balance’s weighing pan if installed may damage instrument’s measuring
mechanism.
3.4. Plugging to mains
The balance should be plugged to mains using the original power adapter, which
is balance’s standard equipment. Plug the power adapter’s plug to balance’s socket
located at the back of the housing.
3.4. Connecting peripheral equipment
Use only accessories and peripheral equipment recommended by the
manufacturer of your balance. The balance must be unplugged from the mains
before connecting or disconnecting any peripherals (printer, PC computer, computer
keyboard). On connecting the peripherals, plug the balance to mains.