About the SCOPIA Elite MCU | 5
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Technical Specifications
This section lists important data about the system you purchased. Refer to this data when
preparing system setup and afterwards as a means of verifying that the environment still complies
with these requirements.
•
System power requirements:
–
90-264VAC input, 50/60Hz
–
Single 400W AC power supply (default) / 48V DC power supply
–
Power consumption of a media blade: max. 250W (50°C)
–
Power consumption of an MCU including the chassis, control blade, and AC power supply:
max. 85W (50°C)
–
Power consumption of an MCU including the chassis, control blade, two media blades and
AC/DC power supply: AC 700VA (50°C), DC 585W (50°C)
–
Maximum power consumption: DC 335W (50°C), AC 392VA (50°C)
–
Heat dissipation: BTU/Hr (50°C)1445 BTU/Hr (50°C)
•
Grounding and electrostatic discharge:
–
External 4mm grounding stud per TUV requirement
•
Environmental requirements:
–
Operating temperature: 0°C to 45°C (32°F to 113°F)
–
Humidity: 5% to 90% non-condensing
–
Storage and transit temperature: -25°C to 70°C (-13°F to 158°F), ambient
–
Acoustics: 56dBA
•
Physical dimensions:
–
Size: 448mm (17.6”) width x 133.35mm (5.25”) height x 400mm(15.75”) depth
–
Size: 448mm (17.6”) width x 44mm (1.73”) height x 480mm (18.9”) depth
–
Weight: ~13kg (~28.7lbs)
•
Signaling protocols:
–
H.323
–
SIP
–
H.320 (in conjunction with SCOPIA H.320 Gateways)
–
H.324M (in conjunction with SCOPIA 3G Gateways)
•
Audio support:
–
Codecs—G.711. G.722, G.722.1, G.729, MPEG4 AAC-LC, Polycom® Siren14™/G.722.1
Annex C
–
DTMF tone detection (in-band, H.245 tones, and RFC2833)
•
Video support:
–
High Definition Continuous Presence video with a resolution of 1080p at up to 30fps
–
Video with 720p resolution is sent and received at up to 60fps
