manualshive.com logo in svg

RADVision Scopia Elite 5100 Series, Руководство по установке

Поделиться
Скачать
RADVision Scopia Elite 5100 Series Скачать руководство пользователя страница 5

1

      About the SCOPIA Elite MCU | 1

RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7

 

About the SCOPIA Elite MCU

The SCOPIA Elite MCU enables multimedia, multiparty collaboration in applications such as group 
conferencing, distance learning, training and video telephony. The MCU supports multimedia, 
multiparty communications in the board room, at the desktop, in the home, or on the road over 
wireless. 

•

Main Features of the SCOPIA Elite MCU .....................................................  page 1

•

Technical Specifications .......................................................................  page 5

Main Features of the SCOPIA Elite MCU

The SCOPIA Elite MCU is a hardware unit which houses videoconferences from multiple endpoints, 
both H.323 and SIP. It includes many powerful features including:

•

Video processing
Video and audio processing is carried out per user rather than per conference. Each user 
connects using unique, optimized audio and video settings to enjoy the best audio and video 
quality supported by their endpoint and network, without affecting the other participants in 
a conference.

•

Seamless interoperability 
The MCU is built on the solid foundation of RADVISION’s H.323 and SIP software, ensuring full 
compliance and unmatched interoperability with IP, ISDN, and 3G networks.
The MCU unites H.323 and SIP devices in the same conference session.
When used with the series of SCOPIA Gateways, the MCU also enables ISDN, V.35, and 3G 
handsets to participate in the same conference session. See 

Figure 1-1 on page 2

.

Содержание Scopia Elite 5100 Series


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды