4
Setting up the MCU | 16
RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Setting up the MCU
Mount the device onto a 19” square-hole rack. Use a shelf to support the device in the rack
(
Figure 4-1 on page 16
).
Figure 4-1
Shelf mounted MCU
These sections describe how to set up the device:
•
Verifying Rack Suitability ..................................................................... page 17
•
Complying with MCU Lifting Guidelines .................................................... page 19
•
Mounting the MCU onto the Rack Using a Shelf ........................................... page 19
•
Attaching the System Ground ................................................................ page 26
•
Connecting Cables to the Device ............................................................ page 26
