RADVision MCU-323, Руководство пользователя

Страница: 82 / 185

Configuring the Built–in Gatekeeper
4-36
5. Click Add to define a new endpoint, or click Edit to edit an existing one. The
Predefined Properties screen is displayed. If the endpoint is online and you want to
set predefined properties for it, from the Online Properties screen that is displayed
click Make Predefined to access the Predefined Properties screen. See Adding a
New Endpoint .
6. In the Max. Distance field enter a number between 0 and 255. The number you enter
will depend on whether you want to allow this endpoint to make call requests to the
zone for which you defined a
Neighbor Distance . Click Ok to confirm. Repeat steps 7
and 8 for all predefined endpoints and online endpoints with predefined properties.
7. From the Application Parameters screen click Network Control . The Network
Control screen is displayed.
8. Click Advanced Settings . The Advanced Settings screen is displayed, (see Figure
4-14). In the Default Distance text box, enter a number between 0 and 255. This
number depends on which zones you want to allow dynamically registered endpoints
to make call requests to. For example, if you set it to 50, all dynamically registered
endpoints can make calls to the zone for which you defined a distance of 50 or greater.
9. Click Ok to confirm.
Saving or Loading Network Control Settings
You can save the Network Control settings to a file. This is useful to prevent all
Gatekeeper data from being lost when the Gatekeeper is unexpectedly shut off. Network
Control settings files are saved with an ‘*.ctr’ file extension.
!
To save the Network Control Settings to a file
1. From the Network Control screen, click Save . The Save As dialog box is displayed.
2. From the Folders list box select the folder in which you want to save this file. By
default this is the same directory in which you installed the configuration software.
3. In the File name field enter a file name. '*.ctr' is the default file extension for the
Network Control settings. Click Ok to confirm.
!
To load a data file to the Network Control settings
1. From the Network Control screen, click Load . The Open dialog box is displayed.
2. From the File name list box select the file you want to load and click Ok . The file is
loaded to the Network Control settings.