RADVision MCU-323, Руководство пользователя

Страница: 54 / 185

Configuring the Built–in Gatekeeper
4-8
Zone Definition
An H.323 Zone is a logical collection of terminals, gateways, and multiple point control
units managed by a single gatekeeper. You can predefine the endpoints in a Zone using the
Zone Definition options.
Zone Access Control
The RADVision Gatekeeper can operate in one of two modes: Open Zone and Strict Zone ,
giving you the choice to control endpoint access to the zone.
In an Open Zone mode, the gatekeeper accepts registration from all endpoints for which
this gatekeeper is defined as the default gatekeeper. This mode allows “plug-and-play”
endpoint additions to the network, but does not give you full access control over the zone.
!
To configure the Gatekeeper to operate in Open Zone mode
1. In the Application Parameters screen, click Network Control . The Network
Control screen is displayed.
2. Make sure the Everyone can register option is selected. Click Ok to confirm.
In a Strict Zone mode the gatekeeper only accepts registration from predefined endpoints.
This mode does not allow “plug-and-play” endpoint additions to the network, as you have to
predefine any endpoints you want to add. Operating in a
Strict Zone mode gives you full
access control over the zone.
Note
For information on network control parameters, see Network Control .
!
To configure the Gatekeeper to operate in a Strict Zone mode
1. In the Application Parameters screen click Network Control . The Network Control
screen is displayed.
2. Clear the Everyone can Register option. Click Ok .
3. Predefine all endpoints for which you want to allow registration to the Gatekeeper. For
details, see
Adding a New Endpoint .