RADVision MCU-323, Руководство пользователя

Страница: 149 / 185

Using the Advanced Commands
9-3
Command Name and Description Parameter Range
NotifyLevel:XX
Changes the type and number of debug
messages that are generated.
10 to 35 – it is not recommended to exceed a
NotifyLevel of 25, as this may overload the
system with a very large debug message
output.
Register:XXX
Displays the IP address of the Gatekeeper the
MCU-323 is registered with or registers the
MCU-323 with another Gatekeeper.
Note: Before you register the MCU-323 with
another Gatekeeper you must unregister it
from its current Gatekeeper.
No parameter — Displays the IP address of
the Gatekeeper to which the MCU-323 is
registered.
IP address of a Gatekeeper —
The MCU-323 registers with this
Gatekeeper. You do not have to type the
whole IP address. When the Gatekeeper is on
the same network segment as the MCU-323,
the host portion of the IP address is enough.
SetPaletteNum:X
Allows you to change the color scheme of
the HTTP based monitoring pages. Currently
there are three defined color options. A
number from 0 to 2 identifies each color
scheme option. The color scheme change
only takes effect after you restart the MCU-
323 unit.
No parameters — Displays the number of
the current color scheme option.
0-2 —Changes the color scheme according
to the option you specify.