RADVision MCU-323, Руководство пользователя

Страница: 112 / 185

Configuring the Unit
6-20
Defining a Default Gatekeeper and Router for a
Distributed MCU-323
The Miscellaneous Settings screen allows you to define a default gatekeeper and a default
router for the MCU-323, and gives you access to the Advanced screen.
The following parameters and settings are displayed in the Miscellaneous Settings screen
(see Figure 6-5 ):
Default Gatekeeper IP — Enter the IP address of the gatekeeper with which you want the
MCU-323 to register. If you are using the built-in Gatekeeper, the IP address in this field is
the same as for the MCU-323 unit. If you disable the built-in Gatekeeper, you must define
another gatekeeper IP address for the MCU-323.
Default Gatekeeper Port — Displays the port through which the MCU-323 communicates
with the gatekeeper.
Default Router IP — Enter the default router IP address for the network segment to which
the MCU-323 is connected.
T.120 Server IP — The IP address of the external T.120 server.
T.120 Server Port — The port number for the external T.120 server.
External T.120 Server — Enables or disables support for the external T.120 Server.
Number of Installed Transcoders — A read only parameter indicating the number of
hardware based ports available for G.723.1 or G.729A/B transcoding in the current unit.
Advanced (button) — Displays the Advanced screen. To use the Advanced Commands ,
see Advanced Commands of the MCU-323.
!
To define a default gatekeeper and router
•
Enter the IP addresses in the Miscellaneous Settings screen as required, and click
Next to proceed. The LAN Port Settings screen is displayed.