RADVision MCU-323, Руководство пользователя

Страница: 79 / 185

Network Control
4-33
"
Default Distance — This is a designation (between 0 and 255) determining the logical
distance that the Gatekeeper is allowed to route out of zone call requests from
dynamically registered endpoints. The Default Distance is compared with the Neighbor
Distance of the destination endpoint zone. Only if it is the same as or greater than the
Neighbor Distance, is the call completed. For more information, see
Distance Settings .
"
Multicast Distance — This is a designation (between 0 and 255) determining the
logical distance outside the zone that the Gatekeeper can route a call using multicast. For
more information, see
Distance Settings .
"
Unresponsive Timeout — Determines how long the Gatekeeper waits for an endpoint
to respond following a Gatekeeper status inquiry. The Gatekeeper makes four status
inquiry attempts before deciding that the endpoint is no longer available. Once the
Unresponsive Timeout interval passes without a response, the Gatekeeper unregisters the
endpoint from Online status, and the endpoint is unable to receive calls.
Factory Defaults — This button resets the Gatekeeper parameters to the factory
configuration. It deletes configuration changes you made including settings concerning
endpoints, neighbors, topology and services. It also disconnects all calls and resets the
MCU-323.
Use with care!
Figure 4-14 – Advanced Settings screen