Radiolink Electronic Ltd
23
Activation:
• Any SWITCH, A-H. If you choose a 3-position switch, then that dual rate instantly becomes a triple
rate.
• The glider programming offers you the choice of Condition. This option allows you to have a
separate rate for each of condition. (GLID)
• Stick position (ACRO GLID). (Ex: On rudder you normally use only the center 3/4 of the stick
movement except for extreme maneuvers such as snaps/spins/stalls. As long as your RUDDER
STICK does not exceed 90% (ie. stall turn), the rudder goes to high rate's 90%, which is a MUCH
higher amount of travel than your low rate at 89%)
Adjustability:
• Range: 0 - 140% (0 setting would deactivate the control completely.) Initial value=100%
• Adjustable for each direction (ACRO/ GLID)
(i.e. Up/down, left/right) (Ex: Most models fly upright without any elevator trim, but require some
down elevator when inverted just to maintain level flight. By increasing the down travel by the
amount required to hold the model inverted, the model now has equal travel available from level
upright or level inverted.
Only if any stick is chosen by the item of "SW1", a switch can also be chosen by the item of
"SW2." When operated simultaneously, the switch operation has priority over the stick operation.
(ACRO)
Exponential:
Change the response curve of the servos relative to the stick position to make fly more pleasant.
You can make the servo movement less or more sensitive around neutral for rudder, aileron,
elevator, and throttle (except HELI type use THROTTLE CURVE instead). (ACRO type throttle EXP
and THROTTLE CURVE can not be activated simultaneously). Many models require a large
amount of travel to perform their best tricks.
However, without exponential, they are touchy around neutral, making them unpleasant to fly and
making small corrections very difficult. Additionally, by setting different exponentials for each rate,
you can make the effectiveness of small corrections similar in each rate, as in our example below:
The best way to understand exponential is to try it:
• Having made no changes yet in the D/R, EXP screen, move SWITCH D to DOWN (toward the
