SV-360HD 3D Camera System
5
SV-360HD 3D Camera Installation/Configuration Guide
Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117
© 2018 Radio Engineering Industries, Inc.
800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com
1.2
Prerequisites
Installing the REI SV-360HD 3D Camera S
ystem is not a “plug-and-play” procedure. Technicians need
to have a strong aptitude towards installing and programming network devices.
Technical understanding of camera system operation and configuration is essential.
Tools and supplies required:
•
½-in. stepper bit
•
⅛-in. drill bit
•
12 self-tapping screws
•
Electric drill/driver
•
Phillips bit or screwdriver
•
Zip ties
SERVICE HOT LINE
USA & CANADA
1-877-726-4617 Toll Free
1-402-339-2200
1.3
Parts List
The following items should be included upon receipt of the REI SV-360HD 3D Camera System:
•
Main Control Unit (710718)
•
COS 7-in. HDMI Touch, 3 AHD Cam-In Monitor (710705)
•
Main Control Unit wiring harness (530191)
•
Remote control
•
Front camera (710722)
•
Rear camera (710722)
•
Left camera (710722)
•
Right camera (710722)
•
Front extension cable
•
Rear extension cable
•
Left extension cable
•
Right extension cable
•
Infrared (IR) receiver
•
Camera gasket set
•
Manual (640538)
1.4
Datasheet
Type
Specification
Video
Video Interface
Mini Plug Connector
Input/Output Impedance
75
Ω
Amplitude
Typical Vpp, 1.2 Vpp Maximum
Bandwidth
8MHz
