SV-360HD 3D Camera System
16
SV-360HD 3D Camera Installation/Configuration Guide
Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117
© 2018 Radio Engineering Industries, Inc.
800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com
3. Connect the trigger of the left/right turning signal from the fuse box to control module wire
harness, or from side mirror turning LED indicator to the camera side of the extending cable.
4. Connect the power cable to the 12-volt battery supply line and connect the wiring harness to
the control module.
5. Attach the control module in the tool cabinet or the space behind the central control panel.
6. Connect all the cables for the pending function testing and debugging procedure and assemble
the panel back to the control module.
5. Test the Wiring
•
Do not turn on the power before assuring that all wire connections are made.
•
Do not hot-plug the control module.
6. Conduct Functional Test
•
Test the main functions and settings of the control module.
7. Adjust the Side Camera Angle
•
Roll the camera to select a proper angle that can allow the side calibration tap to be
overlapped with the reference guide line on the screen.
8. Camera Calibration
•
Follow the step-by-step prompts on the system menu.
•
Once the calibration data is completely collected, the system software will automatically
complete the video merging.
9. Fix Devices
•
Fix the positions of the wire connections, cameras, and the control module.
10. Reconversion
•
To recover all the parts of the vehicle.
2.3
Camera Installation Angle
Select the proper camera installation position to achieve as many pixel contents as possible while
keeping the body of the vehicle visible. The camera optical axis should have a vertical angle of 45°
corresponding to the vehicle body. For buses and trucks, it is recommended to install all the cameras
in the middle point of each top side which is illustrated as follows:
