SV-360HD 3D Camera System
25
SV-360HD 3D Camera Installation/Configuration Guide
Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117
© 2018 Radio Engineering Industries, Inc.
800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com
Start calibrating the four cameras one by one when the cursor is blinking. Using the up/down/left/right
remote-control buttons, move the cursor to the corresponding locations. P
ress the “ok” button to mark
the current calibration point in the window. When the next calibration point is ready for adjustment, it
will begin to blink on the window.
Camera Angle and Direction Window
Use the system menu for guidance to the next calibration pixel point in order from 1 to 8 one by one.
Refer to the correct location and sequence of the calibration points.
Press the red “Mode” button to
toggle to previous calibration point selection.
Sample Camera Calibration Diagram
