61
EN
i
19.1 Light sensor connection when using the
supplied frame
1.
Carefully remove the operating unit from the installation housing.
2.
Insert the light sensor connector * into the socket on the rear of the
operating unit.
3.
Feed the sensor cable into the cable bushing in the frame and guide it
out.
4.
Carefully replace the operating unit with the frame back onto the instal-
lation housing.
* Accessories, see page 130
ATTENTION!
Excessive bending can damage the sensor cable.
The sensor cable is a fibre optic cable. Avoid excessive bending or crush-
ing of the sensor cable.
Operating
unit
Frame
Sensor cable
connector
Cable bushing
