114
EN
28.2 Menu 9.9.2 - Setting the DuoFern mode
The Troll Comfort DuoFern features three DuoFern modes, enabling you
to specify how the device behaves within the DuoFern network or in the
local installation on-site.
Setting the following DuoFern modes in the Troll Comfort DuoFern
[ 1 ] = DuoFern receiver
◆
The Troll Comfort DuoFern is controlled centrally (e.g. through
scenes), for example, by the HomePilot®
◆
In addition, it can be remotely controlled by other DuoFern devices
(e.g. a DuoFern Manual Transmitter)
◆
The automatic functions and switching times configured on the Troll
Comfort DuoFern are not available in the DuoFern mode
[ 1 ]
[ 2 ] = DuoFern transmitter
◆
The Troll Comfort DuoFern is integrated into a DuoFern network
as a central controller and is intended to control other DuoFern
devices with set automatic functions, switching times and manual
commands
◆
When this mode is selected, the other settings in the menus
9.9.5
(Transmitting manual control commands) and
9.9.6
(Transferring
automatic states) are available to you
◆
In addition, it can be remotely controlled by other DuoFern devices
(e.g. a DuoFern Manual Transmitter)
[ 3 ] = Local operation (factory setting)
◆
The automatic functions and switching times configured on the Troll
Comfort DuoFern are stored locally and can only be executed in
order to control a connected tubular motor
◆
In addition, control commands can also be received and executed
from the DuoFern network (e.g. from a DuoFern Manual Transmitter)
