manualshive.com logo in svg

RADEMACHER Troll Comfort DuoFern, Инструкция по электрическому подключению и пусконаладке

Поделиться
Скачать
RADEMACHER Troll Comfort DuoFern Скачать руководство пользователя страница 7

7

EN

i

1.  This manual...

...describes how to install, connect the electrical system and operate the 
Troll Comfort DuoFern.

1.1  How to use this manual

 

◆

Before you begin, please read this manual through completely and 
follow all the safety instructions.

 

◆

Please also read the instruction manuals for the accessories (if avail-
able) as well as the manuals for the respective connected electrical 
appliances.

 

◆

This manual is part of the product. Please store it in an easily accessi-
ble place.

 

◆

When passing the Troll Comfort DuoFern on to a third party, this 
manual must be passed on as well.

 

◆

Damage resulting from non-compliance with this manual 
and the safety instructions will void the warranty. We assume 
no liability for any resulting damage.

i

Содержание Troll Comfort DuoFern





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды