76
EN
24. Automatic wind function, brief description
This function enables you to use the Troll Comfort DuoFern to operate,
for example, connected Venetian blinds in relation to the weather
conditions.
As soon as an external signal transducer detects “
wind
”, it can transmit
the control signal to the Troll Comfort DuoFern in the
DuoFern network
or via one of the correspondingly configured inputs (
E1 or E2
).
Configuration of inputs E1 / E2
9.8.6
The direction of rotation in the event of wind can be configured.
The wind can be used to retract the Venetian blinds or close them as a
draught stop.
If the automatic wind function is active ...
◆
The wind symbol flashes.
◆
Manual operation is no longer possible.
◆
Automatic movement commands are no longer carried out but will
be resumed as soon as the wind subsides. In each case, only the last
automatic movement command is subsequently executed.
i
In manual mode, the automatic wind function remains
active, for example, in order to keep an awning protected
from wind at all times.
i
If the rotation direction for wind is set to
DOWN
and wind
is detected when the drive is at the upper end position,
then the drive moves back to the upper end position as
soon as no more wind is detected.
