33
EN
8.1 Important information prior to the electrical
connection and installation
Setting the end points on the tubular motor
You must configure the end points of the tubular motor before
installing it and making the final electrical connection otherwise
malfunctions may occur.
It is essential that you set both end points of the tubular motor if no end
points have been set yet.
Parallel connection of electronic tubular motors
A maximum of 3 tubular motors can be connected in parallel to the Troll
Comfort DuoFern (e.g. RADEMACHER electronic tubular motors).
In order to do so, follow the information in the instruction
manual of the tubular motor being used.
i
Requirements for blockage detection
Blockage detection is only operational if a mechanical tubular motor is
connected.
Function of inputs E1 and E2
Both inputs can be configured independently of each other. You can
configure the functions of the inputs in menu
9.8.6
, depending on the
required purpose of the connected signal transducers, see page 99.
You can obtain connection and circuit examples from our website at
www.rademacher.de
