manualshive.com logo in svg

RADEMACHER Troll Comfort DuoFern, Инструкция по электрическому подключению и пусконаладке

Поделиться
Скачать
RADEMACHER Troll Comfort DuoFern Скачать руководство пользователя страница 82

82

EN

26.2  Menu 9.2 - Configuring the motor running time

Configuring the running time allows specific targeted positions to be 
assumed based on the running time and roller shutter position. 

The run time setting must be configured if: 

 

◆

You intend to use the ventilation position function, see page 84. 

 

◆

You intend to use the sunshine position function (only if automatic 
slat function is activated, see page 92). 

 

◆

You intend to configure and move to any target position , see  
page 46.

The running time can be detected directly with the Troll Comfort 
DuoFern or you may, for example, measure and configure it with the 
help of a timer.

Measurement information and run time setting:

 

◆

Tubular motor running times can vary depending on temperature. 
For this reason, targeted movement to a specific position is subject 
to certain tolerances.

 

◆

The running time must be configured as precisely as possible in 
order for the desired positions to be reliably assumed.

 

◆

The running time must be reconfigured if the end points are 
changed. 

 

◆

If the running time is configured, for example, with the help of a 
timer, then the speed should be measured in the up direction and 
approx. 10% should be added. 

Содержание Troll Comfort DuoFern





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды