RACOM Ray2, Руководство пользователя

Страница: 8 / 235

Quick Start Guide
• The default addresses of the RAy2 units are:
○ 192.168.169.169/24 - unit labeled
L
○ 192.168.169.170/24 - unit labeled U
• On your PC set up a similar address with the same mask, e.g. 192.168.169.180/24.
○ To configure your PC’s address in Windows XP do the following: Start – Settings – Network
Connections :
Change properties of this connection – Internet Network Protocol (TCP/IP) – Properties – Use
the following IP address
– input 192.168.169.180 and use the mask 255.255.255.0. Click OK
twice.
• Connect both RAy2 units to a PoE source and connect to a PC via PoE for configuration, see figure
Link Configuration below.
• Input the address of the connected RAy2 unit into the address field of your internet browser (such
as Mozilla Firefox), e.g. 198.168.169.169. Login as
admin with password admin .
• Status menu provides information on connection.
• Link settings – Radio menu enables you to change the parameters of the radio and ethernet channel,
Link settings – Service access – Users menu lets you change login parameters.
• Continue as suggested by the Step-by-step Guide.
Fig. 1: Link Configuration
RAy2 Microwave Link – © RACOM s.r.o. 8
Quick Start Guide