RACOM Ray2, Руководство пользователя

Страница: 113 / 235

the switch, the VID assigned to the frame is used to access the VTU. The VTU
returns the FID associated with that VID for MAC address lookups in to the ATU.
MAC
MAC address associated with this ATU entry in the database number defined by
the FID.
Entry state
The Entry state parameter is used to determine the entry's age or its type as
follows:
Use for ordinary static entry. static
Use for Policy DA and/or Policy SA (menu Switch settings – Ad-
vanced – Monitoring – Policy ).
static policy
Use for SA non rate limit and/or DA non rate limit (menu Switch
settings – Interface – PIRL ).
static non
rate limiting
This value is used for the mapping of the DA even if the DA
mapping parameter is disabled (menu Switch settings – Ad-
vanced – ATU settings ).
static man-
agement
Ordinary dynamic entry. dynamic
Use MAC priority
Use this parameter to enable the MAC priority (see MAC priority description).
MAC priority
The MAC's Priority override value when enabled by the Use MAC priority para-
meter. Used for priority override on ingressing frames. Enabling a priority on a
MGMT MAC address will override all priorities for these MGMT frames. Enabling
a priority on a static, non-MGMT MAC address, will only override the frame's
priority if the port's
DA priority override or SA priority override parameters are
enabled.
Trunk member
When this parameter is enabled, the MAC address is a member of a trunk - ac-
cording to the
Trunk Id parameter. When this parameter is disabled, the MAC
address is associated with port(s) - according to the Port association parameter.
Trunk Id
The Trunk ID associated with this MAC address.
The port or ports that this DA MAC address is associated with is determined by
the
Port association parameter below.
Use this parameter to ensure the proper unit management CPU is accessed
when two units are connected in trunk.
Edit
Press the Edit button to open the configuration dialog of the selected ATU data-
base record.
Delete
Delete the selected ATU database record.
Add entry
Add a new ATU database entry.
Flush all and use
default
Delete the whole ATU database and create default record(s).
Flush non-static
Delete all but static ATU database records.
113 © RACOM s.r.o. – RAy2 Microwave Link
Configuration