VRB46
Surround Installation
Small Surrounds:
(44-5/8”W x 17-7/8”)
ZRB46S1BL
ZRB46S1SS
Large Surrounds:
(50-1/2”W x 22-1/2”)
ZRB46S2BL
ZRB46S2SS
The Surround Frames
are 1” thick, with a 3/4”
space behind the
frame. The Fireplace
may be covered up to
within 1/8” of the
opening with non-
combustible materials.
1.
2.
3a.
3b.
1. Hook lower ledge of Surround Frame onto the Lower Front Face Panel of the fireplace. With top of Frame tilted
outward, slide Side Fillers behind Surround Frame.
2. Push Surround Frame into place and install using the existing screw holes in the tile lip. Front Edge of the Side
Filler must rest between Surround Frame and Fireplace.
3. Fasten the Side Fillers to the fireplace using the two [2] existing holes on either side of the firebox opening.
4. Replace the Glass Door. Put Access Cover in place.
Access Panel
(SS Surround Kits Only)
Each kit contains:
(Qty-1) Surround Frame
(Qty-2) Surround Side Fillers
(Qty-1) Surround Access Cover – SS Only
(Qty-8) #6 Self Tapping Screws
NOTE
:
Cotton gloves
must
be worn to protect the finish during
installation and handling.
All hand and finger marks
must
be cleaned off with a soft
cloth and light detergent prior to applying heat to the unit.
Stainless panels may discolour a little during normal operation.
This is normal and should not be considered a defect.
Side Filler
(Left and Right)
Surround Frame
32
