R-Biopharm Rida Cycler, Руководство пользователя

Страница: 75 / 87

RIDA
®
CYCLER
Version 1.0
|
User manual
75
Annex 1: Temperature verification system (TVS)
The TVS can be used to ensure that the RIDA
®
CYCLER is operating to specification in regard to
temperature control
Fig. 64: Temperature verification system
TVS sensor is fragile and connected via a very thin cable.
Please handle with care to avoid breakage. Hold the device only by the sides.
Verification Environment
For optimal results, it is best to perform the tests away from sources of airflow, for example
fans and air vents. The ambient temperature may also have an effect on the measurement. We
recommend to test under standard lab conditions (22 - 28°C).
Hardware and Software Installation
•
Connect the RIDA
®
CYCLER to be verified to your computer and switch it on.
•
Take the TVS out of the protective case and connect it to your computer through USB.
•
Open the RIDA ® CYCLER software.
•
Version must be at least 1.0.
Verification Process
•
Once the RIDA
®
CYCLER and TVS are connected to your computer, scan for devices by
clicking on the Communication icon.
•
Select the instrument to test, and select Temperature Verification from the drop-down menu.
•
Follow the prompts on the TVS Wizard.
•
During these steps, keep the TVS placed beside your RIDA
®
CYCLER instrument.
When prompted by the software, remove the sensor from the foam slot and place it in wells
1
– 4 with the tab facing inwards.
Keep all other wells empty. Once the sensor is secured in with the tube clamp, close the lid and
continue following the prompts on the screen. Verification may take up to 25 min.
At the end, you will be given the option to save or print your verification report.