R-Biopharm Rida Cycler, Руководство пользователя

Страница: 48 / 87

RIDA
®
CYCLER
Version 1.0
|
User manual
48
9.1.7 Multiplex Standards
You can enter standard concentrations for each channel
individually.
Select the Toggle between single and multiplex standards icon to
use the option of
entering multiplexed standards. You must ensure that the assay has been setup as a multiplex.
Switching between single and multiplex is possible; however, only one type can be viewed and
applied during analysis.
Fig. 38: Standard concentrations
9.1.8 Linking an assay to a sample
An assay must be linked to a sample to allow the software to recognize and properly analyze
the sample. Failure to allocate an assay to a sample will result in the sample not being
analyzed.
Link one Assay to a sample.
Select the required samples by highlighting the cells in the Assays column. Use Ctrl + Click to
highlight non-adjacent samples.
Select the required assay from the Available Assays window then drag and drop the assay into
the highlighted cells. Alternatively, click on the selected cells in the Assays column and use the
drop-down list to select the required assays(s) by ticking the box next to the assay name, or
Select All, and then click the OK button.
To remove an assay, form the Assays column, use the delete key of your keyboard or click on
the cell to bring up the drop-down list. Then simply un-check the assay from the list provided to
remove it, or Select All to remove every assay.
Fig. 39: Available Assays window