R-Biopharm Rida Cycler, Руководство пользователя

Страница: 52 / 87

RIDA
®
CYCLER
Version 1.0
|
User manual
52
10 Creating templates
Templates allow the user to set-up runs that will be used repetitively. For example, you may
want to run a group of assays using a particular set of controls and standards in specifically
allocated wells all the time.
10.1 Create a template
Start a New Run.
Complete your run using the same methods described above.
Select the down arrow next to the Save As button, then select Template.
Save the template into the Template library located in Documents/Bio Molecular Systems/
RIDA
® CYCLER /Templates.
You also have the option of creating subfolders within the library.
Fig. 45: Save As button
10.2 Opening a template
Install Template (Help button on the tool bar).
In the New
button on the tool bar, select the template.
The run will open with all the saved parameters including sample annotation.
Start the run as described above (see Starting a Run).
11 During a run
Once acquisition begins, the raw data is displayed for the channels selected under the Data
section. The data is updated following each acquisition and the signal scaled to provide the
best resolution for a group of samples, which can be, highlighted, or selected or deselected
during a run. Analysis of data can be conducted prior to a run completing, if sufficient data is
available to achieve meaningful analysis. Once the run has completed the raw data will always
be available to view in future.
A Run Summary banner will appear as soon as the run commences.