© Copyright Qvis ®. All documentation rights reserved.
40
3.3
IR LED
LANGUAGE: ENGLISH
INFORMATION
[DOME SETTINGS]
MOTION
RESTART
FACTORY DEFAULT
EXIT
MAIN MENU
User can configure the IR LED working mode via
the ‘IR LED’ options within the ‘DOME SETTINGS’
menu. The configuration options are as follows:
1. CONTROL MODE:
AUTO
IR LEDs turn on or off automatically
according to light conditions
TIMING
LED is adjusted according to Open
and Close Times.
OPEN
IR LED kept constantly open
CLOSE
IR LED kept constantly closed
CAMERA
IR LED status (Open/Close) will be
synchronised with Camera
’s day and
night switch set up.
2. SENSITIVITY:
Here the user can manually set the
sensitivity from 1-5. The smaller the number
is the lower the light level of the environment
will be when the IR LEDs are turned on.
3. NEAR/FAR POWER COMPENSATION:
When near power opens or far power opens
according to the power setting, you can set
the near/far power compensation to either:
10%, 20%, 30%, 40%, 50%,
4. AUTO CONTROL:
When the IR LEDs are on, they will turn its
power consumption to the standby status,
which will effectively extend the service life of
IR LEDs. And under this mode, when objects
appear in the screen, the IR LED will turn its
power consumption back to the normal
status.
AUTO CONTROL
STANDBY POWER:
50%
DELAY:
10SEC
SENSITIVITY:
MID
BACK EXIT
DOME SETTINGS
[IR LED]
WIPER
IDLE
ALARM
ADVANCED
OTHERS
BACK EXIT
IR LED
CONTROL: AUTO
SENSE : ----
【
-
】
-
› 4∣
6
NEAR POWER: 100%
FAR POWER: 100%
COMPENSATION: 0%
AUTO CONTROL: OFF
[AUTO CONTROL]
BACK EXIT
